Woodturning - holes log into a vase !! 【職人技】ウッドターニング 丸太からお洒落な花瓶が作れる？！
HTML-код
- Опубликовано: 26 ноя 2019
- Thanks for coming .
In this video, the vase is made from wooden logs.
I think it ’s an entertainment-oriented video that everyone can enjoy.
I ’d be happy if you subscribed to the channel and leave comments and comments.
Created items and work scenes will also be posted on Instagram, so check if necessary.
/ yamabiko821
【Disclaimer】
My video is for entertainment only.
Always read and understand the manufacturer's guidelines and safety instructions when using tools / machines.
The method I use is not safe so take responsibility for your own safety.
来ていただきありがとうございます
。
この動画では、木製の丸太からウッドターニングにより花器を作っています。
時間をかけて製作したので、見て楽しめるエンターテイメント指向のビデオになっていれば幸いです。
また、チャンネルに登録して頂ければ今後の励みになります！
コメントと評価ももらえると嬉しいです。
作品や作業風景はInstagramに投稿しています♪
アカウント→yamabiko821
【免責事項】
私のビデオは娯楽のみを目的としています。
工具や機械を使用するときは、製造元のガイドラインと安全に関する指示を常に読んで理解してください。
私が使用する方法は安全を示すものではないので、安全に関する事は自己責任でお願い致します。。
【BGM】
music by Jason Shaw audionautix.com
audionautix.com/creative-comm...
creativecommons.org/licenses/...
#woodturning#hollowform#vase#vessel 
Развлечения
When you reversed your vase to turn off the bottom part I was so afraid that those thin walls would crack. 😲 You seem to have the most wonderful light and delicate touch. 😊
Really nice to watch a real craftmen
Thank you for your comment!! From Japan🙇🇯🇵
when do you know enough is enough? fine peice of art now.
Great outcome there Yamabiko - I was half expecting you once turning down so thin to 1/8” inch you were going to bore bottom out reversing upside down for one of Your light shades on ceiling inside👍🤓
Thank you for your comment!🙇🇯🇵
I used to enjoy thinning. Fortunately there are no major mistakes. I want to make a flower object for the first time in a long time.
Nice job! If you are going to be doing a lot of hollowing, you may think about getting (or making) a simple right angle tool rest. This would allow you to support the tool closer to the cut while inside a vessel reducing chatter. Cheers!
thank you for your comment!
This time, the amount of tools protruding from the tool post was close to 6 inches. In addition, since a long object was held only by the chuck, many vibrations occurred. My work will soon be a few days off, so make a 3-point stady and right-angle tool rest! Thank you for teaching me!
You obviously like turning thin walled pieces, I believe some would be just as nice a little thicker, still admire your skill.
Thank you for your comment! I'm happy to hear that!!🙇🇯🇵
I don't think I will make very thin works once they are sold. These are entertainment, but it seems that few turners make thin pieces.
I enjoy watching you turn,not only are your tools sharp you know how to use them. Watch and learn. Thank you
Thank you very much!🙏
I think what you say is correct.
I am still studying, but feel that I need more knowledge of how to cut than sharpening.
Some people use similar tools to cut many times more accurately than me.
Love it, very talented.
Thank you!! I'm very happy!!✨
Great work, really nice piece thanks for sharing, J
I designed it so that I could see the expression of the tree well.
I am very happy to receive many comments.
I love how transparent and delicate it is!!!
Thank you for your comment as always!!🙇🇯🇵
Very nice
Thank you very much!
I thought about the position of the hole so that it looks interesting ♪
技術的な素晴らしいです！
ありがとうございます！！
Технически и технологически- абсурд...50%"пустая"работа по обработке бревна поперек..Нельзя было пилой отпилить круг?
I just saw this today. I can’t wait till you can sell to the US. 😎
Thank you very much!!🙏
There's a lot to do and it's hard to soon sell right away, but within a few months! Thank you very much!
I’ll be waiting for updates. 😎
@@mgmcd1 It will be updated within two days! Please come back again🙏✨
It is a pleasure to watch you turn.
Thank you !!Although it was late, I will post small wood turning within a few days!
Beautiful work and your bold final 🏅14:50. 🌿🇸🇰
Thank you!!✨✨
I don't have much time, so I'm using this method, which is a bit dangerous.
BRAVO Un saluto da Roma . Roberto
Mille Grazie! Sono così felice di sentirlo! ! Saluti dal Giappone👏🇯🇵
That deep hollowing I use a boring bar mounted in the tool post of my engine lathe. I still hand the tool the outside of the work piece but hollowing I use a boring bar with tool steel with a radius edge. If I tried to to hand tool the inside of a bowl or vase on my engine lathe it would not stall it would keep going and cause me serious injury. My lathe has a 7 HP motor that runs on 220 3-phase which is the same that my dad's CNC milling machine runs on and he has a phase converter.
Thank you for your comment!
I didn't know much about CNC machines, but they have the power of 7HP.
I was surprised!
If I can make the inside of the vase accurately and quickly, I think there is not much point in doing it manually like I do.
I have to do it by hand because I can't afford such a luxury machine.
I love that!! Beautiful. Strange question - what do you do with all the sawdust? It is pretty cool too.
Thank you very much!!!🙏🇯🇵
Sawdust is collected and used for building materials such as heat insulating materials and soundproofing materials.
すごいです、、
木工旋盤では線対称なものしか作成できないのでしょう？非対称なものはどのようにしているのでしょう
コメントありがとうございます。
乾燥前の生の木を加工することで変形し、左右非対称になります！
また、あまり大きな物では難しいですが、軸を何度かずらして加工すれば左右対象ではなくなります。
今後、左右非対称な物も載せていく予定です！
مرحبا كيف الحال .....اقتراح لكم اخي الكريم في بعض الاحيان تضع ضوء صغير من اجل ايجاد العيوب او الشقوق غير المرئية ..بالأخص....عند الزنبق....لذلك تظهر الوان جدا رائعة .. خلال الفحص ..ونحن هنا الان ضوء صغير من الداخل بعد الانتهاء من العمل وصورة بالهاتف المحمول ...واترك لكم الخيال نسبح بهذا البحر الرائع من الوان الطيف وامواج الحياة بحلوها ومرها ...
كيف حالك
شكرا على التعليق!
سأدرس!
كانت الثقب في هذا العمل على شكل طائر مائي ، وكنت راضيًا.
شكرا للشجرة.
Do you like the shape of the jug! Like
Thank you very much! I got a good look!
А нельзя было обрезать бревно пилой перед установкой в станок, чтобы уменьшить сьем лишнего и не насиловать , без толку, резцы? Это, что..такие " высокие" технологии у вас?
で？何を作ったの？？何に使えるの？
コメントありがとうございます！
鑑賞用の作品ですが、中にコップを入れれば花瓶にもなります。
日本では、何に利用出来るかを最初に考える傾向にあるようですが、穴空きの花瓶は最近は増えているようです。
須田二郎さんは陽明な作家ですり